Hung’s International Inc. U.S.A
To fully take advantage of our speciality & practical experience of machine lubrication,to save your money,time & energy !
Synthetic Worm Gear lubricant
- Commodity name: Synthetic Worm Gear lubricant
- Commodity ID: L0981
LUBRIPLATE® SYNTHETIC WORM GEAR LUBRICANT
LUBRIPLATE® SYNTHETIC WORM GEAR LUBRICANT is a high performance synthetic oil that meets the ever-increasing demand for industrial gearing applications. This fluid is a 100% synthetic-based product, formulated with state-of-the-art additives.
LUBRIPLATE® SYNTHETIC WORM GEAR LUBRICANT is an excellent gear and bearing lubricant for use under severe conditions, such as extremely high or low temperatures.
LUBRIPLATE® SYNTHETIC WORM GEAR LUBRICANT provides several advantages over mineral oil-based products.
1. Excellent thermal stability and oxidation-resistant characteristics, increasing the service life of the lubricant many times over that ofmineral oils.
2. Outstanding anti-wear properties, resulting in extended drain intervals and longer equipment life.
3.Exceptional demulsibility characteristics.
4. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range.
5.Broad range of compatibility with elastomers and seal materials.
6.Exhibits very low coefficient of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption.
LUBRIPLATE® SYNTHETIC WORM GEAR LUBRICANT:
Physical Characteristics ASTM Typical Properties
Viscosity @ 40°C cSt D-445 440.2
@ 100°C cSt D-445 46.6
Viscosity @ 100°F SUS D-445 2191
Viscosity Index D-2270 164
Pour Point, °F D-97 -50
Flash Point, °F D-92 550
Fire Point, °F D-92 585
Specific Gravity D-287 0.8597
Color D-1500 L-0.5
Neutralization Number D-974 0.3
Copper (Cu) Corrosion D-130A 1a
ISO Viscosity Grade 460
SAE Gear Oil No. 140
Four-Ball Wear Test D-4172 0.41 mm
Average Wear Scar Diameter
(40 kg, 1200 rpm, 1 hr. @ 75°C)
Conradson Carbon Residue D-189 Nil
Emulsion Characteristics @ 82°C D-1401 39-39-2 (10)
(Oil Water Emulsion)
Rust Test Procedure B D-665 Pass/No Corrosion
Oxidation Test (Minutes) D-2272 > 2000
Packaging Available Part Number
Case, 12/1-Qt Plastic Bottles L0981-054
Case, 4/1-Gal Jugs L0981-057
5-Gal Pail L0981-060
16-Gal Drum L0981-061
55-Gal Drum L0981-062
Printed in USA