LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680

*NSF H2 Registered

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are high performance, extreme pressure synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. They are zinc-free.

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are available in (5) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680) and are designed for many extreme and stringent applications.

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme pressure fortified synthetic fluid is required.

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids provide several advantages over mineral oil based products.

? Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils.

? Outstanding extreme pressure and anti-wear properties resulting in extended drain intervals and longer equipment life.

? Exceptional demulsibility characteristics.

? High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range.

? Broad range of compatibility with elastomers and seal materials.

? Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption.

(Over)

LUBRIPLATE SYN LUBE HD Series ISO VG 150 - 680 Typical Properties

                                                      Syn Lube HD      Syn Lube HD      Syn Lube HD      Syn Lube HD      Syn Lube HD

Physical Characteristics ASTM         150                      220                      320                      460                       680

Viscosity @ 40°C cSt     D-445         162                      199                      310                      440                       705

@ 100°C cSt                  D-445         21                         25                       35                        47                          68

Viscosity @ 100 °F       D-445         816                       988                     1545                     2191                      3384

Viscosity Index              D-2270       154                       154                     157                       164                        170

Pour Point °F/°C            D-97           -60/-51                -55/-48                -50/-46                 -50/-46                 -45/-43

Flash Point °F/°C          D-92           540/282               540/282              540/282                550/288                555/291

Fire Point °F/°C             D-92           590/310               580/304              585/307                585/307                580/304

Specific Gravity             D-287         0.855                   0.8571                0.8586                   0.8597                 0.8628

Color                              D-1500        1.0 max              1.0 max              1.0 max                 1.0 max                1.0 max

Neutralization No.         D-974          0.3                       0.3                     0.3                          0.3                        0.3

Copper (Cu) Corrosion  D-130A       1a                        1a                      1a                           1a                          1a

ISO Viscosity Grade ----------           150                      220                    320                        460                         680

SAE Gear Oil No. ----------               80W-90               90                     80W-140                140                         ------

AGMA No. ----------                         4 EP                     5 EP                 6 EP                      7 EP                      8 EP

Performance Characteristics

Four-Ball Wear Test       D-4172       0.34 mm             0.34 mm           0.34 mm                  0.34 mm               0.34 mm

AverageWear Scar Diameter

(40 Kg., 1200 rpm., 1 hr. @ 75°C)

Four-Ball EP (Weld Load) D-2783   315 kgf              315 kgf             315 kgf                   315 kgf                 315 kgf

Timken (OK Load)           D-2782     65 lbs.                  65 lbs.              65 lbs.                     65 lbs.                  65 lbs.

Conradson Carbon Residue D-189     Nil                       Nil                   Nil                           Nil                        Nil

Emulsion Characteristics @ 82°C D-1401 40-40-0 (5) 40-40-0 (5)      40-40-0 (5)              40-40-0 (5)          40-40-0 (5)

(Oil/Water/Emulsion)

Rust Test Procedure B D-665             Pass                     Pass                Pass                         Pass                      Pass

                                                            No                       No                   No                           No                        No

                                                         Corrosion             Corrosion         Corrosion              Corrosion               Corrosion

Rotating Bomb

Oxidation Test (Minutes) D-2272    > 2000                  > 2000             > 2000                   > 2000                   > 2000

LUBRIPLATE Syn Lube HD 220 and LUBRIPLATE Syn Lube HD 460 pass the 12 Stages of the Four Square (FZG) Test

Packaging Available Syn Lube HD 150 Syn Lube HD 220 Syn Lube HD 320 Syn Lube HD 460 Syn Lube HD 680

Carton 4/1 Gallon Jugs                     L1000-057         L1001-057         L1002-057          L1003-057          L1004-057

5-Gallon Pail                                    L1000-060          L1001-060         L1002-060          L1003-060          L1004-060

16-Gallon Drum                               L1000-061          L1001-061         L1002-061          L1003-061          L1004-061

55-Gallon Drum                               L1000-062          L1001-062         L1002-062          L1003-062          L1004-062

*NSF H2 Registration No’s             139840                139841              139842                139843                139844

(These products are acceptable as lubricants where there is no possibility of food contact (H2) in and around food processing areas. Such compounds may be used as lubricants, release agents, or antirust films on equipment and machine parts in locations in which there is no possibility of the lubricant or lubricated part contacting edible products).

*NSF - National Sanitation Foundation Printed in USA

11/30/11