LUBRIPLATE SYN LUBE SERIES - ISO VG Grades 150, 220, 320, 460, 680 & 1000

*NSF H2 Registered

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology.

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000).

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products.

? Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils.

? Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life.

? Exceptional demulsibility characteristics.

? High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range.

? Broad range of compatibility with elastomers and seal materials.

? Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption.

(Over)

LUBRIPLATE SYN LUBE Series - ISO VG Grades 150, 220, 320, 460, 680 & 1000 Typical Properties

                                                                     Syn Lube    Syn Lube   Syn Lube    Syn Lube    Syn Lube   Syn Lube

Physical & Performance Characteristics     150             220           320               460             680          1000

Viscosity @ 40°C cSt ASTM D-445          151             216           311               446             623          950

@ 100°C cSt ASTM D-445                        20               26             34                 45               57            77

Viscosity @ 100   °F  ASTM D-445          762             1088         1557             2143           3289        4900

@ 210°F ASTM D-445                              97               128          161                211            275           372

Viscosity Index ASTM D-2270                 156              155          155                156            157           157

Pour Point °F/°C ASTM D-97                 -60/-51         -50/-46     -50/-46         -45/-43       -45/-43      -35/-37

Flash Point °F/°C ASTM D-92                510/266       510/266   505/263         505/263     500/260    500/260

Fire Point °F/°C ASTM D-92                  555/291       555/291    550/288        550/288     545/285    545/285

API Gravity ASTM D-287                       36.8            36.7           35.6              35.1            34.5           33.7

Color ASTM D-1500                               1.0 max      1.0 max     1.0 max        1.0 max      1.0 max     1.0 max

Neutralization No. ASTM D-974            0.8              0.8             0.8                0.8              0.8             0.8

Copper (Cu) Corrosion ASTM D-130A  1a                1a               1a                1a               1a               1a

ISO Viscosity Grade ----------                  150              220             320              460            680              1000

SAE Gear Oil No. ----------                     80W-90       90              80W-140      140           --------          --------

AGMA No. ----------                               4                  5                6                    7               8                  9

Four Ball Wear Test ASTM D-4172      0.34 mm     0.34 mm    0.34 mm       0.34 mm     0.34 mm   0.30 mm

Average Wear Scar Diameter

(40 kg., 1200 rpm., 1 hr. @ 75°C)

LUBRIPLATE Syn Lube 220 and LUBRIPLATE Syn Lube 460 passed ASTM D-5182 and DIN 51354 Modified to 13 and 14 Stages.

Packaging Available   Syn Lube 150   Syn Lube 220     Syn Lube 320    Syn Lube 460     Syn Lube 680     Syn Lube 1000

Carton 4/1 Gallon Jugs L0974-057      L0975-057         L0976-057          L0977-057         L0978-057         L0979-057

5-Gallon Pail                L0974-060      L0975-060         L0976-060          L0977-060         L0978-060         L0979-060

16-Gallon Drum           L0974-061      L0975-061         L0976-061          L0977-061         L0978-061         L0979-061

55-Gallon Drum           L0974-062      L0975-062         L0976-062          L0977-062         L0978-062         L0979-062

*NSF H2 Registration No’s 137921   135908               137922                 135909              137923               139839

(These products are acceptable as lubricants where there is no possibility of food contact (H2) in and around food processing areas. Such compounds may be used as lubricants,

release agents, or antirust films on equipment and machine parts in locations in which there is no possibility of the lubricant or lubricated part contacting edible products). Printed in USA

*NSF - National Sanitation Foundation 11/30/11 

LUBRIPLATE SYN LUBE Series - ISO VG Grades 150, 220, 320, 460, 680 & 1000 Typical Properties

Syn Lube Syn Lube Syn Lube Syn Lube Syn Lube Syn Lube

Physical & Performance Characteristics ASTM 150 220 320 460 680 1000

Viscosity @ 40°C cSt D-445 151 216 311 446 623 950

@ 100°C cSt D-445 20 26 34 45 57 77

Viscosity @ 100?F D-445 762 1088 1557 2143 3289 4900

@ 210°F D-445 97 128 161 211 275 372

Viscosity Index D-2270 156 155 155 156 157 157

Pour Point °F/°C D-97 -60/-51 -50/-46 -50/-46 -45/-43 -45/-43 -35/-37

Flash Point °F/°C D-92 510/266 510/266 505/263 505/263 500/260 500/260

Fire Point °F/°C D-92 555/291 555/291 550/288 550/288 545/285 545/285

API Gravity D-287 36.8 36.7 35.6 35.1 34.5 33.7

Color D-1500 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max

Neutralization No. D-974 0.8 0.8 0.8 0.8 0.8 0.8

Copper (Cu) Corrosion D-130A 1a 1a 1a 1a 1a 1a

ISO Viscosity Grade ---------- 150 220 320 460 680 1000

SAE Gear Oil No. ---------- 80W-90 90 80W-140 140 -------- --------

AGMA No. ---------- 4 5 6 7 8 9

Four Ball Wear Test D-4172 0.34 mm 0.34 mm 0.34 mm 0.34 mm 0.34 mm 0.30 mm

Average Wear Scar Diameter

(40 kg., 1200 rpm., 1 hr. @ 75°C)

LUBRIPLATE Syn Lube 220 and LUBRIPLATE Syn Lube 460 passed ASTM D-5182 and DIN 51354 Modified to 13 and 14 Stages.

Packaging Available Syn Lube 150 Syn Lube 220 Syn Lube 320 Syn Lube 460 Syn Lube 680 Syn Lube 1000

Carton 4/1 Gallon Jugs L0974-057 L0975-057 L0976-057 L0977-057 L0978-057 L0979-057

5-Gallon Pail L0974-060 L0975-060 L0976-060 L0977-060 L0978-060 L0979-060

16-Gallon Drum L0974-061 L0975-061 L0976-061 L0977-061 L0978-061 L0979-061

55-Gallon Drum L0974-062 L0975-062 L0976-062 L0977-062 L0978-062 L0979-062

*NSF H2 Registration No’s 137921 135908 137922 135909 137923 139839

(These products are acceptable as lubricants where there is no possibility of food contact (H2) in and around food processing areas. Such compounds may be used as lubricants,

release agents, or antirust films on equipment and machine parts in locations in which there is no possibility of the lubricant or lubricated part contacting edible products). Printed in USA

*NSF - National Sanitation Foundation 11/30/11