Hung’s International Inc. U.S.A
To fully take advantage of our speciality & practical experience of machine lubrication,to save your money,time & energy !
SynXtreme HD Series Grease
- Commodity name: SynXtreme HD Series Grease
- Commodity ID: L0401-0403
LUBRIPLATE SYNXTREME HD Series
*NSF H-2 Registered
LUBRIPLATE SYNXTREME HD greases are 100% synthetic, calcium sulfonate based. This advanced technology delivers outstanding shear stability, reduced wear and excellent resistance to water and other corrosive substances. They are outstanding lubricants for all types of anti-friction bearings, which are subjected to wide operating temperature ranges.
The synthetic fluid used in these greases delivers increased oxidation stability and enables them to be effective at application temperatures up to 400ºF with frequent re-lubrication intervals. The major use benefits are:
* Mechanical stability - the greases do not thin out.
* Deliver excellent anti-wear (AW) and extreme pressure (EP) protection. (See specific results on back page)
* Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention.
* Excellent resistance to chemically treated water washdown procedures at high temperatures.
* Delivers lubricant consolidation because of their multi-use capability.
Packaging HD-2 HD-1 HD-0
415 lb. Drum L0401-040 L0402-040 L0403-040
120 lb. Drum L0401-039 L0402-039 L0403-039
35 lb. Pail L0401-035 L0402-035 L0403-035
Case 40/14.5 oz. Cartridges L0401-098 L0402-098 --------------
LUBRIPLATE SYNXTREME HD Series -
Typical Properties ASTM HD-2 HD-1 HD-0
Thickener --- Calcium Sulfonate Calcium Sulfonate Calcium Sulfonate
Complex Complex Complex
NLGI Grade D-217 2 1 0
Color Visual Tan Tan Tan
Texture Visual Smooth Smooth Smooth
Dropping Point D-2265 >600ºF >600ºF >600ºF
Consistency D-217 --- --- ---
Unworked Penetration D-217 277 314 349
(60X) Worked Penetration D-217 280 318 361
Oil Separation; % Loss D-1742 0.0 0.0 N/A
Water Washout @ 175°F; % Loss D-1264 < 0.5 < 0.5 < 0.5
Rust Prevention Properties D-1743 Pass Pass Pass
Four Ball Wear; mm Scar Diameter D-2266 0.45 0.50 0.58
Evaporation Loss @ 100°C; % Loss D-972 0.11 0.11 0.18
4-Ball EP; Weld Load; Kg D-2596 420 400 315
Oxidation Stability @ 100 Hrs. D-942 -1 psi -1 psi 0 psi
Base Fluid Properties
Type PAO PAO PAO
ISO VG 100 100 100
Viscosity @ 40°C; cSt 90 - 110 90 - 110 90 - 110
Cold Test Minus 40°F Minus 40°F Minus 40°F
LUBRIPLATE Synxtreme HD-2 has successfully passed all of the ASTM D-4950 testing and
is recognized by the NLGI as a GC-LB approved product.
*NSF H-2 Registration No’s. 138560 Pending
(Meets USDA 1998 Guidelines)
*These products are acceptable as lubricants where there is no possibility of food contact (H2) in and around
food processing areas. Such compounds may be used as lubricants, release agents, or antirust films on equipment
and machine parts in locations in which there is no possibility of the lubricant or lubricated part contacting edible
*NSF - National Sanitation Foundation
Printed in USA