Hung’s International Inc. U.S.A
To fully take advantage of our speciality & practical experience of machine lubrication,to save your money,time & energy !
SYNTREME FG Series 100% H-1 Grease
L0307, L0306, L0305,
- Commodity name: SYNTREME FG Series 100% H-1 Grease
- Commodity ID: L0307, L0306, L0305,
LUBRIPLATE SYNXTREME FG Series
*NSF H-1 Registered
“These products are certified OU Kosher Pareve”
“These products are Halal certified”
LUBRIPLATE SYNXTREME FG products are 100% synthetic, calcium sulfonate based greases. Their advanced technology delivers outstanding shear stability, reduced wear and excellent resistance to water and other corrosive substances. These food grade greases are manufactured with ingredients that comply with FDA 21 CFR 178.3570. The synthetic fluid used in these greases delivers increased oxidation stability and enables them to be effective at application temperatures up to 400ºF with frequent re-lubrication intervals. The major use benefits are:
* Mechanical stability - the greases do not thin out.
* Delivers excellent anti-wear (AW) and extreme pressure (EP) protection. (see specific results on back page)
* Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention.
* Excellent resistance to chemically treated water washdown procedures at high temperatures.
Packaging FG-2 FG-1 FG-0
415 lb. Drum L0305-040 L0306-040 L0307-040
120 lb. Drum L0305-039 L0306-039 L0307-039
35 lb. Pail L0305-035 L0306-035 L0307-035
Case 40/14.5 oz. Cartridges L0305-098 L0306-098 --------------
LUBRIPLATE SYNXTREME FG Series -
Typical Properties ASTM FG-2 FG-1 FG-0
Thickener --- Calcium Sulfonate Calcium Sulfonate Calcium Sulfonate
Complex Complex Complex
NLGI Grade D-217 2 1 0
Color Visual Tan Tan Tan
Texture Visual Smooth Smooth Smooth
Dropping Point D-2265 >600ºF >600ºF >600ºF
Consistency D-217 --- --- ---
Unworked Penetration D-217 277 314 349
(60X) Worked Penetration D-217 280 318 361
Oil Separation; % Loss D-1742 0.0 0.0 N/A
Water Washout @ 175°F; % Loss D-1264 < 0.5 < 0.5 < 0.5
Rust Prevention Properties D-1743 Pass Pass Pass
Four Ball Wear; mm Scar Diameter D-2266 0.45 0.50 0.58
Evaporation Loss @ 100°C; % Loss D-972 0.11 0.11 0.18
4-Ball EP; Weld Load; Kg D-2596 420 400 315
Oxidation Stability @ 100 Hrs. D-942 -1 psi -1 psi 0 psi
Base Fluid Properties
Type PAO PAO PAO
ISO VG 100 100 100
Viscosity @ 40°C; cSt 90 - 110 90 - 110 90 - 110
Cold Test Minus 40°F Minus 40°F Minus 40°F
"The LUBRIPLATE Synxtreme FG Series contain no components derived from TSE/BSE relevant animal species; therefore, they are compliant with the requirements of the TSE Note for Guidance EMEA/410/01 Rev. 2, October 2003".
*Authorized by NSF for use in food processing facilities as a lubricant or anti-rust agent on equipment in which there may
be incidental contact involving the lubricated part and the edible product.
*NSF H-1 Registration No’s. 136212 137238
(Meets USDA 1998 Guidelines)
*NSF - National Sanitation Foundation
Manufactured with ingredients that comply with FDA 21 CFR 178.3570.
Printed in USA