FISKE⑧BRONTHERS Refining d/b/a
NSF International

Hung’s International,Inc.
Service Tel:4000-789-277
F: (+86)22-66283410

Copyright 2016 Hung's (Tianjin) International Trade Co.,Ltd Lubriplate Lubricants Company. All Rights Reserved  津ICP备05001612号  Powered by


Please click here  Feedback / Email / User Login



Hung’s International Inc. U.S.A

(Technical Service)

To fully take advantage of our speciality & practical experience of machine lubrication,to save your money,time & energy !

Page view:

SYNAC Series



LUBRIPLATE SYNAC Series products are diester based synthetic compressor fluids formulated to meet a multitude of demanding compressor applications where traditional petroleum based lubricants may not be desirable. These diester based synthetic fluids are outstanding lubricants for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. The extended drain interval capabilities of LUBRIPLATE SYNAC Series makes it a very cost effective solution to your compressor applications.

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

LUBRIPLATE Division strongly recommends the use of the FREE LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. This allows you to establish proper change out intervals and still maintain effective lubrication of your equipment. Typical service life can be from 2,000 to 8,000 hours depending upon operating conditions. Fluid life can be affected by various contaminants, moisture, temperature and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the FREE

LUBRIPLATE Oil Analysis Program.

Advantages offered by LUBRIPLATE SYNAC Series include the following:

 Excellent High Temperature Stability and Oxidation Resistance = Extended Lubricant Life

 Very Low Deposit Forming Tendencies = Clean Operation

 Excellent Demulsibility Characteristics = High Separator Efficiency

 High Flash Point and Low Pour Point = Wide Operating Temperature Range

 Outstanding Anti-Wear Protection = Long Bearing and Cylinder Life

 Foam Suppression Properties = Extended Vane and Screw Life

 Corrosion Inhibitors = Excellent Rust Protection

 USDA H-2 Authorized* = Safe For Use In Federally Inspected Food Plants

LUBRIPLATE SYNAC Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, and LUBRIPLATE SFGO Series Fluids. Always consult LUBRIPLATE before changing to a SYNAC fluid from an existing lubricant that may not be compatible with diester based fluids. Conversion procedures from petroleum based products are available upon request.

LUBRIPLATE SYNAC Lubricants are recommended for use with high nitrile Buna-N, Teflon, Viton, Fluorosilicone and polysulfide elastomers.

LUBRIPLATE SYNAC Lubricants are NOT recommended for use with low nitrile Buna-N, neoprene, natural rubber, styrene-butadiene rubber (SBR, Buna-S) or butyl rubber.

*Authorized by USDA for use in federally inspected meat and poultry plants. USDA H-2 authorized lubricants may be used on equipment as a lubricant or anti-rust film and in closed systems in locations in which there is no possibility of the lubricant or lubricated part contacting edible product.


                                                            SYNAC-32            SYNAC-46              SYNAC-68              SYNAC-100

Viscosity SUS @ 100°F                     155                         213                           311                           510

SUS @ 210°F                                     46                           49                             53                              60

cSt @ 40°C                                         31                           44                             64                             100

cSt @ 100°C                                       6                              7                              8                               10

Viscosity Index                                   135                         118                           98                             76

Pour Point °F/°C                               -45/-43                   -35/-37                     -20/-29                       -15/-26

Flash Point °F/°C                               450/232                  455/235                   455/235                     450/232

Fire Point °F/°C                                 530/277                  535/279                   535/279                     530/277

API Gravity                                        23.2                        21.0                         19.0                           18.2

Color                                                  L -0.5                     L - 0.5                       L - 0.5                       L - 0.5

Four-Ball Wear Test                           0 .4 mm                0.4 mm                      0.4 mm                     0.4 mm

Average Wear Scar Diameter

40kg., 1200 r.p.m., 1 hour @ 75°C

SAE Grade                                         10                              20                           20                             30

ISO Viscosity Grade                           32                             46                           68                             100

LUBRIPLATE SYNAC Oils are available in the following packaging:

Packaging Available                SYNNAC-32               SYNAC-46               SYNAC-68            SYNAC-100

Carton, 12/1 Qt. Bottles            -------------                -------------                 -------------              L0935-054

Carton, 4/1 Gal. Jugs                -------------                 -------------                 -------------             L0935-057

5 Gallon Pail                             L0932-060                L0933-060                 L0934-060             L0935-060

55 Gallon Drum                        L0932-062                L0933-062                 L0934-062             L0935-062

                                                                                                                                                 Printed in USA 

                                                                                                                                                 Revised 4-25-08

Corresponding parameter set not found, please add it in property template of background
Previous article
Next article