Hung’s International Inc. U.S.A
To fully take advantage of our speciality & practical experience of machine lubrication,to save your money,time & energy !
SYNAC150, SYNAC220, SYNAC320
LUBRIPLATE "SYNAC 150, 220 & 320” SERIES
LUBRIPLATE SYNAC 150, 220 & 320 Series products are diester based synthetic fluids formulated to meet a multitude of demanding applications where traditional petroleum based lubricants may not be desirable. These diester based synthetic fluids are outstanding lubricants for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. The extended drain interval capabilities of LUBRIPLATE SYNAC Series make them a very cost effective solution for your lubricant needs.
The LUBRIPLATE SYNAC 150, 220 & 320 Series make excellent lubricants for vacuum pumps, blowers, gear boxes, centrifuges and chains.
LUBRIPLATE Division strongly recommends the use of the FREE LUBRIPLATE Oil Analysis Program to establish extended drain intervals. This allows you to establish proper change out intervals and still maintain effective lubrication of your equipment. Typical service life can be from 2,000 to 8,000 hours depending upon operating conditions. Fluid life can be affected by various contaminants, moisture, temperature and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the FREE LUBRIPLATE Oil Analysis Program.
Advantages offered by LUBRIPLATE SYNAC Series include the following:
Excellent High Temperature Stability and Oxidation Resistance = Extended Lubricant Life
Very Low Deposit Forming Tendencies = Clean Operation
Excellent Demulsibility Characteristics = High Separator Efficiency
High Flash Point and Low Pour Point = Wide Operating Temperature Range
Outstanding Anti-Wear Protection
Foam Suppression Properties
Excellent Rust Protection
LUBRIPLATE SYNAC Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, and LUBRIPLATE SFGO Series Fluids. Always consult LUBRIPLATE before changing to a SYNAC fluid from an existing lubricant that may not be compatible with diester-based fluids. Conversion procedures from petroleum-based products are available upon request.
LUBRIPLATE SYNAC Lubricants are recommended for use with high nitrile Buna-N, Teflon, Viton, Fluorosilicone and polysulfide elastomers.
LUBRIPLATE SYNAC Lubricants are NOT recommended for use with low nitrile Buna-N, neoprene, natural rubber, styrene-butadiene rubber (SBR, Buna-S) or butyl rubber.
LUBRIPLATE "SYNAC 150, 220 & 320” SERIES - TYPICAL PROPERTIES
Physical Characteristics ASTM SYNAC 150 SYNAC 220 SYNAC 320
Viscosity @ 100°F SUS D-445 754 1003 1496
@ 210°F SUS D-445 71.3 82.5 99.1
@ 40°C cSt D-445 147 200.6 290.1
@ 100°C cSt D-445 12.6 15.61 20.04
Viscosity Index D-2270 71 74 77
Pour Point °F/°C D-97 -25/-32 -20/-29 -5/-20
Flash Point °F/°C D-92 540/282 545/285 475/246
Fire Point °F/°C D-92 570/299 575/302 505/263
API Gravity D-287 15.8 15.3 17.3
Color D-1500 < 1.0 < 1.0 < 1.0
Density (Pounds/Gallon) 8.0 8.03 7.92
ISO Viscosity Grade 150 220 320
Four-Ball Wear Test D-4172 0.45 0.45 0.45
Average Wear Scar Diameter
(40 Kg., 1200 rpm., 1 hr. @ 75°C)
Copper Corrosion D-130 1a 1a 1a
Conradson Carbon Residue D-189 Nil Nil Nil
Emulsion Characteristics @ 82°C D-1401 43-37-0 (25) 43-37-0 (25) 43-37-0 (25)
Evaporation Loss D-972 3.0 Max. 3.0 Max. 3.0 Max.
(6.5 hours @ 204°C)
Rust Test Procedure B D-665 Pass, no corrosion Pass, no corrosion Pass, no corrosion
LUBRIPLATE SYNAC Oils are available in the following packaging:
Packaging Available SYNAC 150 SYNAC 220 SYNAC 320
5 Gallon Pail L0936-060 L0937-060 L0938-060
55 Gallon Drum L0936-062 L0937-062 L0938-062
Printed in USA